AQUEOUS GUARD® STONE COAT 2
ALL POROUS STONES
- EASY CLEANING
- REDUCED MAINTENANCE & CLEANING
PROTECTION FOR YOUR STONE AGAINST:
- WATER STREAKING
- UV COLOUR CHANGE
- MOULD AND MILDEW
PROPERTIES / PRODUCT DESCRIPTION
Aqueous Guard® Stone Coat 2 has been developed and tested to protect your stone from water, oil stains, dirt & grime as well as mold mildew build up.
Stone Coat 2 gives your stone surface hydrophobic & oleophobic properties seriously reducing maintenance and cleaning regimes as well as time spent cleaning. Water and liquids simply bead and roll off the substrate. The capillaries are reduced but not shut off completely meaning the stone is still able to breathe naturally, but will not allow pollutants or dirt & grime to ingress into the stone due to the repellant nature of the coating. Cleaning of the surface can take place with just water once coated with Aqueous Guard® Stone Coat 2.
Appearance: Clear / colorless liquid | Cure time: 24 hours | Binder base: Polymer | Touch Dry: 1-2 hours | Thickness cured: ~0.5um nominal | UV: Stable
Ensure the stone is free of dirt and contaminants and completely dry. Aqueous Guard® Stone Coat 2 is then spray applied to the surface with an even coat ensuring all areas are coated. The surface should be damp and remain looking wet for a minimum of 30 seconds. If the product appears to evaporate quickly, re-apply immediately.
Using Aqueous Guard® Marine ensures easy cleaning of your stone surface whilst offering protection from staining, water streaking and UV!
After the initial preparation and application of Stone Coat 2, no aggressive cleaners or chemicals are necessary. Re-application of Stone Coat 2 should be carried out season by season.
We have a detailed Application guide for this product.
Contact firstname.lastname@example.org for a copy.