AQUEOUS GUARD® STONE COAT 1
ALL MASONRY SURFACES
- EASY CLEANING
- REDUCED MAINTENANCE & CLEANING
- REDUCES MOSS BUILD UP
PROTECTION FOR YOUR STONE AGAINST:
- FREEZE THAW DAMAGE
- WATER STAINING
- ACID RAIN & POLLUTANTS
- DIRT AND GRIME
- UV & WEATHERING
PROPERTIES / PRODUCT DESCRIPTION
Aqueous Guard® Stone Coat 1 has been developed and tested to protect your stone from water staining, freeze thaw damage, UV, dirt & grime.
Stone Coat 1 gives your stone surface hydrophobic properties seriously reducing maintenance and cleaning regimes. Harsh acid rain simply beads and rolls off the substrate. The capillaries are reduced but not shut off completely meaning the stone is still able to breathe naturally but will not allow pollutants, dirt and grime to ingress into the stone due to the repellant nature of the coating. Cleaning of the surface can take place with just water once coated with Stone Coat 1.
Appearance: Clear / colorless liquid | Cure time: 24-48 hours | Binder base: Silane | Touch Dry: 2-4 hours | Thickness cured: ~0.5um nominal | UV: Stable
Ensure the stone is free of dirt and contaminants and completely dry. Stone Coat 1 is then spray applied to the surface with an even coat ensuring all areas are coated. The surface should be damp and remain looking wet for a minimum of 30 seconds. If the product appears to evaporate quickly, re-apply immediately.
Using Aqueous Guard® Construction ensures easy cleaning of your stone surface whilst offering protection from harsh winters and atmospheric pollution!
After the initial preparation and application of Stone Coat 1, just water is all that is required to maintain the coating and clean the stone.
We have a detailed application guide for this product.
Contact firstname.lastname@example.org for a copy.